Chase Research IOPRINT+ Print Server Guide de l'utilisateur télécharger pdf (Page 100)

Windows Peer-to-Peer - NetBEUI

Page 100

Chapter 2 Installation and Configuration

Installing Additional Ports on Multi-port Models

If you are installing a multiple port IOPRINT+ Print Server, you must add additional ports and

printers. To do so, use the following procedure.

1. Go to the Printers folder and click on the printer just added. Select Properties, then the

Ports tab as shown below.

2. Select Add Port and select the IOPRINT+ Print Server's port as the port to add.

3. Enter the configuration information as for the first port. Ensure that you select a different

IOPRINT+ Print Server port each time, and assign a unique name to that port.

4. Repeat steps 2. and 3. until all IOPRINT+ Print Server ports have been added.

5. Install the correct printer for each port. When prompted with the following screen, ensure

that you select the port to which the printer is connected.

Configuration is now complete. You can now print using the printers attached to the

IOPRINT+ Print Server.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 304 305

Pas de commentaire

Chase Research IOPRINT+ Print Server Guide de l'utilisateur Page 100